REMOTE ENGINE STARTER FOR AUTOMATIC TRANSMISSION.

■ Can only be installed on vehicle equipped with an automatic transmission only
■ Remote start your vehicle at approximately 1200 feet.
■ Keyless entry Ready.
■ Keyless running mode (allows to leave the engine running without the ignition key) .
■ Panic mode.
■ Night timer mode.
■ Safety lock mode.

INPUT / OUTPUT:
30/40A built-in relays for Ignition, Accessories, Starter and Parking Lights.
500 mA negative output programmable for horn or siren ( panic mode )
500mA output for positive or negative (optional) power door lock.
500mA ground output for starter kill (relay required).
Channel 3, 500mA ground output for trunk opening or any accessory.
Negative ground output for non-flashing L.E.D.
Four 500mA ground outputs to bypass factory anti theft system. One is constant and the others are pulses.

TACH signal learning, manual adjustment or factory default setting
Engine shuts-off when TACH wire is disconnected (through system only)
Engine shuts-off when hood is opened or brake pedal depressed
Programmable running time (10, 15 or 25 minutes)
Cranking time programmable for 6, 8 or 12 seconds
Valet switch to interrupt engine remote starting .
Push switch to by-pass starter kill in case of lost transmitter or system malfunction .
Programmable Glow plug delay for Diesel engine (10 or 20 sec.)
Programmable door lock signal output: 0.75 second output, 3 seconds output or 2 pulses to lock and unlock.
Programmable ignition lock when brake pedal is depressed after ignition is ON.
Code learning system, you can code up to 4 different transmitters.
Diagnostics on remote starter via parking lights.
Tested from - 30C to + 80C

    SPA-2000 installation manual English, revision 2.x
    SPA-2000 user manual English